Basic Info.
Base Material
Stainless Steel
Pixel Configuration
SMD5050
Display Function
Constant
Lifetime
50000 Hours-100000 Hours
Certification
CE, RoHS, CCC, EMC
Model Number
Ew-5050gss-W
Item Type
LED SMD LED Brick
Working Temperature
-20-50
Lamp Body Material
Glass Paver
Surface Load Capacity
500kgs
Place of Origin
Guangdong, China (Mainland)
Origin
Guangdong, China (Mainland)
Product Description
RGB/Single Color LED Dancing Floor Tiles with 18.6W 12/24V LED Paver of DIY Size Any color Accepted (DIY Shape) W/ Glass Cover Surface+Stainless steel Base as holder .
Color: Red, Blue, Green, Yellow, RGB Accepted, DIY or Customized as your requests (Any size and any color accepted!)
Other Hot Size: 10*10cm, 10*15cm, 15*15cm, 20*20cm, 30*30cm, 40*40cm, 50*50cm(Advised Hot Dancing floor built-up solution), 60*60cm, 80*80cm,
Application: Widely used in Disco/Dance floor, Bar, Hotel, Mall, Outdoor Square.
What is the DMX512?
It follows that a Controller with International standards protocol, which widely used in landscape lighting engineering (Lighting project)! Or Professional Lighting Solution. DMX Output signal with 512 channel to control different kinds of Lighting effect. Floors could be auto run or controlled by DMX console. There are 30 color pattern effects are build. Programmed By IC Which realize 7 Color shad/jump/stream Change
Tech Parameters
1.Material: Tempered Glass (Surface)+Stainless Steel (Base)
2.Size: 40*40*5cm
3.Power:18.6W
4.LED Qty: 96PCS LEDs
5.Shape: Square Glass paver (Surface)
6. Input Voltage: 12/24V
7.Apply to Club, Dancing Floor, Disco. Decorating walking street, Square, Sidewalk, Gardens and stage.
8. Color Available: Single (Red, Yellow, Red, Green, Warm, White, Pink) RGB
Features:
1) Programmed by IC which realize 7 color shade/jump/stream change
Etc
2) Quick response in color as people step at and touch on the brick. Automatically turn into the ensemble effect which no sense triggered.
3) DMX512 external SD card, program in SD card for off-line controlling the lighting effect.
4) Widely used in Disco/dance floor, bar, hotel, mall, Outdoor square. Etc
Tech Parameters: XLS FINISHED
Case for LED Dancing floor Tiles
Standard Packaging, (400pcs )
1) 400 pcs LED Floor Tiles, 10*10 pcs LED Dance floor COMPUTER Connecting
2) 2 Pieces Master DMX512 Controller _ DMX Decoder
3) 13 Pieces Subsidiary DMX Controller
4) 19 Pieces LED Switch Power Supplier
Color Options
Model No. | Picture | Description | Unit Price(USD) |
Size | power | Input Voltage | LED quantity(PCS) | Weight(kg) | Color | 1-1000pcs 101-500pcs 501-1000pcs |
EW-5050GSS-R | | Size:500*500*60(±2)MM ,IP65-68,DIP LEDS | 26w | 12v/24v | 441 | 13 | red | |
EW-5050GSS-Y | | 12v/24v | 441 | 13 | yellow | |
EW-5050GSS-B | | 12v/24v | 441 | 13 | blue | |
EW-5050GSS-G | | 12v/24v | 441 | 13 | green | |
EW-5050GSS-RGB | | 12v/24v | 441 | 13 | RGB | |
EW-5050GSS-W | | 12v/24v | 729 | 20 | white | |
Installation Overview for LED Floor Tiles
General Instructions .Walls and Ceilings-Additional Instructions & Diagrams specific to your project might be supplied.
# Locate Wall Studs or Support Members that will be used to attach the Tile Support Box (Base)/
# Screw Tile Support Box to Studs with Provided crew holes in sides and back
# Route Branch Cable from Ewin LED Power and Control Unit to support Box and Tiles according to Local Code, Enter Box through Openings.
# Install drywall and Cut opening around Outside of Support Box.
# Remove Tile Termination Box Cover and Connect Branch Cable to Tile with wire Nuts.
# Connect Back of the Tile and Front of support Box. (See details Photos)
# Tiles slides to bottom of Support Box and Reveals about a 1/2 inch of the support box on top.
# Apply caulk or other finish material around tile edges
# For Base Material (Must provide for adequate drainage if Tiles are located outside or Potentially Wet Location)
# Install Conduit and Cable
Any problems, & and want more details. Pls contact me, will provided you as your requests.
Item | Specification |
Color | Red, Yellow, Blue, Green, Pink, White etc |
Sensor | Human body sense(Touch), gravity Sense(Step) |
Input Voltage | DC12/24V |
Power | 18.6w |
Protection level | IP65-68 |
Lighting source | SMD LED (RGB) |
Color Changing mode | Singel color, Doube color jump changing, 7 colors are changed synchronously |
Material | 12mm Tempered glass+stainless steel(base) |
Led qty | |
Size | 400*400*64.5 mm |
Weight | N.W.:5KGS G.W.:6KGS |
Endure Weight | 500KGS MAX |
Working Temperature | "-25ºC+50ºC |
Controller | DMX512 with SD Card which can be programmed in SD ad request for off-line connect |
Certificate | CE, RHOS |
Package | 20'GP 40'GP 40,HP |
<100PCS 101-1000PCS >1000PCS |
Address:
Block 2, Huahan Technical Park, No. 16 Jinniu Road, Pingshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Apparel & Accessories, Light Industry & Daily Use, Lights & Lighting
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Ewin Lighting Technology Co., Ltd is a subsidiary corporation of Lechance Group. She is a a high-tech enterprise who specializes in developing, manufacturing and selling of LED Lighting, and lighting accessories. Our product includs LED downlight, LED neon flex, LED Tile, LED Decorative light, LED explosion proof light Wireless DMX512 controller, LED power supply, USB DMX controller, LED Shoe, etc.
We began to export in 1999 and focus LED lights since 2006. Up to now, we have grown up to a enterprise who employs over 1000 staff members include 20 R&D members. We own advanced production lines, strong R&D team and excellent production and quality control team. To meet the increasing market demands, we always adjust our product structure to design innovative products. We have accumulated considerable know-how in our field, supplemented by superior services...
We sincerely welcome customers at home and abroad to visit our factory for purchasing and OEM. Source for super quality products.